PDF下载 分享
[1]王 堃,蔡强顺.电子束焊接熔池流场数值模拟研究[J].火箭推进,2015,41(01):98-104.
　WANG Kun,CAI Qiang-shun.Numerical simulation of EBW pool fluid flow field[J].Journal of Rocket Propulsion,2015,41(01):98-104.
点击复制

电子束焊接熔池流场数值模拟研究

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 41 期数: 2015年01期 页码: 98-104 栏目: 工艺与材料 出版日期: 2015-04-30
Title:
Numerical simulation of EBW pool fluid flow field
作者:
王 堃1;  蔡强顺2
1． 海装西安局，陕西 西安 710065；2． 西安航天发动机厂，陕西 西安 710100
Author(s):
WANG Kun1;  CAI Qiang-shun2
1. Xi’an Bureau, Naval Equipment Department of China, Xi’an 710065, China 2. Xi’an Space Engine Factory, Xi’an 710100, China
关键词:
电子束焊接; 流场; 热源模型; 316L不锈钢
Keywords:
electron beam welding;  flow field;  heat source model;  316L stainless steel
分类号:
V434-34
文献标志码:
A
摘要:
基于电子束焊接“钉型”焊缝特征，建立了高斯面和旋转高斯衰减体复合热源模型，采用ANSYS FLOTRAN CFD有限元软件，对焊接熔池流场进行了数值模拟，研究了熔池内液态金属在温度场作用下涡漩流动过程，电子束、熔池、液态金属蒸汽之间相互作用关系，电子束匙孔效应、匙孔壁能量传递方式，熔深方向液态金属流动机理等；将316L不锈钢热物性参数输入复合热源模型，通过仿真计算，得到了316L不锈钢焊接工艺规范，即加速电压为60 kV，电子束流为30 mA，焊接速度为8 mm/s，采用该规范焊接的316L不锈钢试件焊缝拉伸强度为425 MPa，满足设计要求。通过对比数值模拟与实际焊接结果表明：模拟熔池形貌与实际焊缝形貌一致，数值计算结果与焊接试验结果相吻合，从而证明复合热源模型是正确和适用的。
Abstract:
Gauss area and rotary Gauss decay body hybrid heat source model was established based on the seam feature of nail-shaped electron beam welding (EBW). The weld pool fluid flow field in EBW was simulated numerically with the finite element software ANSYS FLOTRAN CFD. The vortex flow of liquid-state metal in weld pool under temperature field, interaction among electron beam, weld pool and liquid-state metal vapor, electron beam keyhole effect and energy transmission pattern of keyhole wall as well as liquid-state metal flow mechanism along welding penetration were investigated. The welding specifications (60 kV accelerating voltage, 30 mA electron beam current and 8 mm/s welding speed) of 316L stainless steel were obtained by simulation calculation and solution that inputs thermophysical properties of 316L stainless steel into hybrid heat source model. Applying the above specifications, the welded joint tensile strength of 316L stainless steel specimen reached 425 MPa, which satisfys the design requirement. The comparison result of simulated weld shape and actual weld shape indicates that numerical calculation results is in accordance with actual testing results, which proves the validity and applicability of the heat source model.

参考文献/References:

[1]何景山, 张秉刚, 张亚斌, 等. 电子束深熔焊匙孔的研究现状[J]. 焊接, 2007 (6): 28-30.
[2]周琦, 刘方军. 电子束深熔焊接过程匙孔动力学研究进展[J]. 焊接学报, 2001, 22(3): 88-92.
[3]汪建华. 焊接数值模拟技术及其应用[M]. 上海: 上海交通大学出版社, 2003.
[4]陈芙蓉, 霍立兴, 张玉凤. 电子束焊接技术在工业中的应用与发展[J]. 电子工艺技术, 2002, 23(2): 56-58.

[5]倪红芳, 凌祥, 涂善东. 多道焊三维残余应力场有限元模拟[J]. 机械强度, 2004, 26(2): 218-222.

[6]HIRT C W, NICHOLS B D. Volume of fluid (VOF) method for the dynamics of free boundary[J]. Computer Physics, 1981 (39): 201-225.
[7]CARMIGNANI C, MARES R, TOSELLI G. Transient finite element analysis of deep penetration laser welding process in a single pass buttwelded thick steel plate [J]. Computer Methods in Applied Mechanics and Engineering, 1999, 179(3): 197-214.
[8]吴甦, 赵海燕, 王 煜, 等. 高能束焊接数值模拟中的新型热源模型[J]. 焊接学报, 2004, 25(1): 91-94.
[9]ANTHONY T R, CLINE H E. Surface rippling induced by surface tension gradients during laser surface melting and alloying[J]. Journal of Applied Physics, 1977, 48(9): 3888- 3894.
[10]李春胜, 黄德彬. 金属材料手册[M]. 北京: 化学工业出版社, 2005: 587-596.
[11]丁启湛, 丁成钢, 史春园. 不锈钢的焊接[M]. 北京: 机械工业出版社, 2009: 35-36.
[12]刘黎明, 迟鸣声, 宋 刚, 等. 镁合金激光-TIG复合热源焊接热源模型[J]. 机械工程学报, 2006, 42(2): 82-85.
[13]ARATA Y, ABE E, NABEGATA E N. Dynamic welding phenomena during EB-welding[C]//4th International Col- loquium on Welding and Melting by Electron and Laser Beam. France: CEN SACLAY, 1988: 21-40.
[14]霍厚志. 激光深熔焊过程仿真技术[D]. 太原: 太原科技大学, 2009.
[15]赵 勇. 基于力学平衡条件电子束焊接匙孔形态的研究[D]. 哈尔滨: 哈尔滨工业大学, 2008.

相似文献/References:

[1]于 康,谢荣华,陈晓江.表面张力贮箱电子束焊接工艺研究[J].火箭推进,2015,41(05):89.
　YU Kang,XIE Ronghua,CHEN Xiaojiang.Study on electron beam welding process for surface tension tank[J].Journal of Rocket Propulsion,2015,41(01):89.
[2]唐 虎,张金容,韩红伟.汽蚀管流场数值模拟[J].火箭推进,2013,39(04):52.
　TANG Hu,ZHANG Jin-rong,HAN Hong-wei.Numerical simulation of venturi flow field[J].Journal of Rocket Propulsion,2013,39(01):52.
[3]冯锦虎,高峰,何至林.超燃冲压发动机隔离段内附面层/激波串相互干扰研究[J].火箭推进,2010,36(02):5.
　Feng Jinhu,Gao Feng,He Zhilin.Investigation of boundary layer/shock wave train interference in a scramjet isolator[J].Journal of Rocket Propulsion,2010,36(01):5.
[4]王定军,宋会玲,刘伟.冷气推进器流场仿真和分析[J].火箭推进,2010,36(02):36.
　Wang Dingjun,Song Huiling,Liu Wei.Simulation and research of the nitrogen thruster flow field[J].Journal of Rocket Propulsion,2010,36(01):36.
[5]柳长安,邹宇.环喉型塞式喷管的数值仿真研究[J].火箭推进,2010,36(06):1.
　Numerical simulation of an annular throat plug nozzle[J].Journal of Rocket Propulsion,2010,36(01):1.
[6]王定军,宋会玲,白少卿,等.减压阀节流口流场仿真和分析[J].火箭推进,2009,35(06):37.
[7]刘成胜,李仁年.螺旋离心泵的外特性试验与流场数值分析[J].火箭推进,2005,31(05):22.
　Liu Chengsheng,Li Rennian.Experimental investigation of exterior performances and numerical analysis of flow field in a helix centrifugal pump[J].Journal of Rocket Propulsion,2005,31(01):22.
[8]王英杰,杨卫鹏.表面张力贮箱电子束焊接工艺研究[J].火箭推进,2016,42(05):82.[doi:10.3969/j.issn.1672-9374.2016.05.014]
　WANG Yingjie,YANG Weipeng.Research on electron-beam welding of surface tension tank[J].Journal of Rocket Propulsion,2016,42(01):82.[doi:10.3969/j.issn.1672-9374.2016.05.014]

备注/Memo

收稿日期：2014-07-18；修回日期：2014-08-29 作者简介：王堃（1983—），男，工程师，研究领域为机械电子工程

更新日期/Last Update: 1900-01-01