航天推进技术研究院主办
[1]秦红强,裴曦,范文婷,等.采用MBD技术的液体火箭发动机三维模型设计[J].火箭推进,2017,43(03):42-46.
QIN Hongqiang,PEI Xi,FAN Wenting,et al.The 3D model design of liquid rocket engine using MBD technology[J].Journal of Rocket Propulsion,2017,43(03):42-46.
点击复制
QIN Hongqiang,PEI Xi,FAN Wenting,et al.The 3D model design of liquid rocket engine using MBD technology[J].Journal of Rocket Propulsion,2017,43(03):42-46.
采用MBD技术的液体火箭发动机三维模型设计
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
43
期数:
2017年03期
页码:
42-46
栏目:
研究与设计
出版日期:
2017-08-01
- Title:
- The 3D model design of liquid rocket engine using MBD technology
- Keywords:
- model based definition; liquid rocket engine; 3D model; collaborative design; 3D simulation
- 分类号:
- V434-34
- 文献标志码:
- A
- 摘要:
- 采用MBD（Model Based Definition）技术，以Pro/E和Intralink为协同设计平台，首次实现了液体火箭发动机的全三维数字化模型设计。通过将设计、工艺、材料和制造等相关信息包含在三维模型中，并将三维模型电子分发下厂，实现了用MBD模型完全取代传统研制模式中的二维图纸；同时基于MBD模型实现了三维仿真和装配过程分析，减少了方案反复。结果表明采用MBD技术的三维模型设计可显著提高产品研制效率，并为三维数字化制造奠定了坚实基础。
- Abstract:
- Using MBD（Model Based Definition）technology, the 3D model design of liquid rocket engine was realized on the platform of Pro/E and Intralink for the first time. The design, process, material and manufacture information were contained in the 3D model which were distributed electronically to factory and replaced the 2D drawings in the traditional development mode. Based on the MBD model, the 3D simulation and assembling process analysis were carried out, which decreased the scheme iteration. The research results indicate that the 3D model design using MBD technology can remarkably increase the development efficiency. Meanwhile, it can lay a solid foundation for the 3D digital manufacture.
参考文献/References:
[1]何德华, 肖鹏飞, 蔡亚宁. MBD技术在航天器研制中的应用探讨[J]. 航天器工程, 2014, 24(1): 126-132.
[2]李婷婷, 刘俊堂, 张永辉. MBD技术在大飞机研制中的应用[J]. 航空制造技术, 2014(17): 88-92.
[3]冯潼能, 王铮阳, 孟静晖. MBD技术在数字化协同制造中的应用与展望[J]. 南京航空航天大学学报, 2012, 44:132-137.
[4]曲直, 田宪伟, 李春威.MBD技术在飞机设计中的应用[J]. 航空制造技术, 2013 (12): 103-106.
[5]全国技术产品文件标准化技术委员会. GB/T24734.1-11-2009 技术产品文件 数字化产品定义数据通则[S].北京: 中国标准出版社, 2009.
[6]范玉青, 梅中义, 陶剑. 大型飞机数字化制造工程[M]. 北京: 中航工业出版社, 2011.
[7]拜明星, 齐鹏斌. MBD技术在飞机研制中的应用[J]. 航空制造技术, 2013 (22): 102-105.
[8]周养萍, 亓江文. MBD技术在大飞机研制中的应用实施方法[J]. 机械设计与制造工程, 2013, 42(12): 24-27.
[9]田承根, 朱天文, 刘新宇. 全三维技术在飞机设计中的应用[J]. 航空制造技术, 2012(22): 57-60.
[10]乔志峰, 赵庆斌, 李刚, 等. 基于MBD的数字化仿真技术在航天制造企业应用研究[J]. 航天制造技术, 2014(5): 6-10.
[11]王红雨, 顾翠, 敬石开. 模型成熟度驱动的航天IPT协同研制模式研究[J]. 航天制造技术, 2013 (10): 63-67.
[12]秦红强, 王猛, 杨亚龙, 等. 液体火箭发动机三维数字化协同设计研究[J]. 火箭推进, 2016, 42(3): 76-80.
QIN Hongqiang, WANG Meng, YANG Yalong, et al. Study on 3D digital collaborative design of liquid rocket engine[J]. Journal of rocket propulsion, 2016, 42(3): 76- 80.
[13]李亚杰, 何阳. 三维工艺与MES在航天发动机数字化制造中的应用研究[J]. 火箭推进, 2015, 41(2): 90-97.
LI Yajie, HE Yang. Application of 3D process and MES in digitalization manufacture of space engine[J]. Journal of rocket propulsion, 2015, 41(2): 90-97.
[14]裴曦, 王涛, 杨飒, 等. 发动机主承力构件热结构特性分析[J]. 火箭推进, 2016, 42(3): 41-44.
PEI Xi, WANG Tao, YANG Sa, et al. Primary structure of engine thermal structure characteristics analysis[J]. Journal of rocket propulsion, 2016, 42(3): 41-44.
相似文献/References:
[1]郑 伟,李护林,陈新红.激光快速成形技术在液体动力领域的应用前景[J].火箭推进,2015,41(06):1.
ZHENG Wei,LI Hulin,CHEN Xinhong.Application prospect of laser rapid prototyping
technology in the field of liquid power[J].Journal of Rocket Propulsion,2015,41(03):1.
[2]郭 敬,宋晶晶,孔凡超.发动机推进剂增压输送系统建模仿真技术综述[J].火箭推进,2015,41(05):1.
GUO Jing,SONG Jingjing,KONG Fanchao.Overview of modeling and simulation technology
for propellant pressurization feed system
of liquid rocket engine[J].Journal of Rocket Propulsion,2015,41(03):1.
[3]于 康,谢荣华,陈晓江.表面张力贮箱电子束焊接工艺研究[J].火箭推进,2015,41(05):89.
YU Kang,XIE Ronghua,CHEN Xiaojiang.Study on electron beam welding process
for surface tension tank[J].Journal of Rocket Propulsion,2015,41(03):89.
[4]刘中华,苏 晨,汪军安,等.气路膜片设计研究[J].火箭推进,2015,41(05):95.
LIU Zhonghua,SU Chen,WANG Junan,et al.Design and study of pneumatic diaphragm in gas circuit[J].Journal of Rocket Propulsion,2015,41(03):95.
[5]薛 薇,蔡震宇,曹红娟,等.基于可视化平台的液氢/液氧火箭发动机核心部件质量计算[J].火箭推进,2015,41(04):61.
XUE wei,CAI Zhenyu,CAO Hongjuan,et al.Mass calculation of key assembly units in
LH2/ LOX rocket engine based on visual interface[J].Journal of Rocket Propulsion,2015,41(03):61.
[6]穆朋刚,童 飞,蒲光荣,等.温度对贮箱增压系统的影响分析[J].火箭推进,2015,41(04):74.
MU Penggang,TONG Fei,PU Guangrong,et al.Influence of temperature on tank pressurization system[J].Journal of Rocket Propulsion,2015,41(03):74.
[7]高朝辉,刘 宇,肖 肖,等.垂直着陆重复使用运载火箭对动力技术的挑战[J].火箭推进,2015,41(03):1.
GAO Zhao-hui,LIU Yu,et al.Challenge to propulsion technology for vertical
landing reusable launch vehicle[J].Journal of Rocket Propulsion,2015,41(03):1.
[8]申智帅,等.气动增压器技术及其在空间推进系统的应用[J].火箭推进,2015,41(03):15.
SHEN Zhi-shuai,RUAN Hai-jun,et al.Pneumopump technology and its application
in space propulsion system[J].Journal of Rocket Propulsion,2015,41(03):15.
[9]张 翔,徐洪平,安雪岩,等.液体火箭发动机稳态运行故障
数据聚类分析研究0[J].火箭推进,2015,41(02):118.
ZHANG Xiang,XU Hong-ping,AN Xue-yan,et al.Clustering analysis for fault data in steady process of
liquid propellant rocket engine[J].Journal of Rocket Propulsion,2015,41(03):118.
[10]窦 唯,闫宇龙,金志磊,等.某发动机涡轮泵转子高温超速/疲劳试验研究[J].火箭推进,2015,41(01):15.
DOU Wei,YAN Yu-long,JIN Zhi-lei,et al.Fatigue experiment of turbo-pump rotor at
over-speed and high temperature condition[J].Journal of Rocket Propulsion,2015,41(03):15.
备注/Memo
收稿日期：2016-11-01；修回日期：2017-02-13 基金项目：国家863项目（2013AA70202） 作者简介：秦红强（1983—），男，工程师，研究领域为液体火箭发动机总体设计
更新日期/Last Update:
1900-01-01