航天推进技术研究院主办
[1]左蔚,张权明,雷玥,等.K4202镍基高温合金激光选区熔化成形室温拉伸性能研究[J].火箭推进,2017,43(03):53-58.
ZUO Wei,ZHANG Quanming,LEI Yue,et al.Mechanical properties of selective laser melted and shaped K4202 nickel-based superalloy at room temperature[J].Journal of Rocket Propulsion,2017,43(03):53-58.
点击复制
ZUO Wei,ZHANG Quanming,LEI Yue,et al.Mechanical properties of selective laser melted and shaped K4202 nickel-based superalloy at room temperature[J].Journal of Rocket Propulsion,2017,43(03):53-58.
K4202镍基高温合金激光选区熔化成形室温拉伸性能研究
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
43
期数:
2017年03期
页码:
53-58
栏目:
工艺与材料
出版日期:
2017-08-01
- Title:
- Mechanical properties of selective laser melted and shaped K4202 nickel-based superalloy at room temperature
- Keywords:
- K4202 nickel-based superalloy; selective laser melting; mechanical property tests; heat treatment
- 分类号:
- V463-34
- 文献标志码:
- A
- 摘要:
- 为了将激光选区熔化（SLM）这项技术推广到液体火箭发动机高温合金复杂结构件的成形，满足其使用要求，对SLM成形K4202高温合金力学性能及其强化机理进行研究。沉积态室温下拉伸试验力学性能指标表现出了很强的各向异性，但均接近或超过GH4202锻件标准值，通过光学显微镜（OM）、扫描电镜(SEM)、X射线衍射（XRD）、透射电镜（TEM）等理化分析手段揭示了其强化机理主要为细晶强化、应变硬化、沉淀硬化和过饱和的固溶强化。同时研究了固溶、固溶时效、直接时效三种热处理制度对K4202力学性能的影响，结果表明直接时效后的综合力学性能最佳。
- Abstract:
- In order to promote selective laser melting (SLM) to shaping of superalloy complicated structural components of liquid rocket, and meet its requirement, the mechanical property and strength mechanism of K4202 superalloy formed by SLM are analysed. The tensile tests were executed in the deposited state at room temperature. The mechanical performance index got from the tests shows a very strong anisotropy, even is close to or exceeds the standard value of GH4202 alloy forgings. Physical and chemical analysis means of optical micrographs (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy(EDS), X-ray diffraction(XRD) etc. revealed its main strength mechanism, which is fine-grain strengthening , strain hardening and supersaturation solution strengthening. Three heat treatments of solution, solution aging and direct aging were studied in order to evaluate the influence on the mechanical properties of K4202 superalloy. The research result shows that the mechanical properties of the superalloy after direct aging heat treatment are the best.
参考文献/References:
[1]VILAROA T, COLIN C, BARTOUT J D, et al. Sennour.Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy[J]. Materials science and engineering A 2012, 534: 446-451.
[2]MAISONNEUVE J. Direct manufacturing of aeronautical parts in Ti-6Al-4V and IN718: direct metal deposition and selective laser melting[D]. [s.l.]: Mines-ParisTech, 2008.
[3]VILARO T. Direct manufacturing of aeronautical parts in Nimonic 263 andA360 through selective laser melting: thermal, microstructural and mechanicalapproaches[D]. [S.l.]: Mines ParisTech, 2011.
[4]TRIVEDI R, KURZ W. Solidification microstructures: A conceptual approach[J]. Acta metallurgica materialia, 1994, 42(1): 15-23.
[5]胡汉起. 金属凝固原理[M]. 北京: 机械工业出版社, 1999.
[6]TOMUS D. Controlling the microstructure of Hastelloy-X components manufactured by selective laser melting[J]. Phys Proc, 2013 (41): 816-820.
[7]MERCELIS P, KRUTH J-P. Residual stresses in selective laser sintering and selective laser melting[J]. Rapid proto- typing J, 2006, 12(5): 254-265.
[8]TROSCH T, STR■βNER, V■LKL R, et al. Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting [J]. Materials letters 2016 (164): 428-431.
[9]DIVYA V D, MUNOZ-MORENO R, MESSE O M, et al. Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment[J]. Materials characterization, 2016 (114): 62- 74.
[10]王建明, 杨舒宇. 镍基铸造高温合金[M]. 北京: 冶金工业出版社, 2014.
相似文献/References:
[1]左 蔚,赵 剑,白 静,等.激光选区熔化菱形正十二面体点阵材料的承载与失效特性[J].火箭推进,2020,46(05):87.
ZUO Wei,ZHAO Jian,BAI Jing,et al.Research on bearing and disable properties of laser selective melting rhombohedral dodecahedral lattice materials[J].Journal of Rocket Propulsion,2020,46(03):87.
[2]杨兴远,魏红伟,张静,等.激光选区熔化成形TA7钛合金各向异性分析[J].火箭推进,2023,49(04):99.
YANG Xingyuan,WEI Hongwei,ZHANG Jing,et al.Anisotropy analysis of laser selective melting forming TA7 titanium alloy[J].Journal of Rocket Propulsion,2023,49(03):99.
[3]左蔚,张权明,吴文杰,等.K42O2高温合金激光选区熔化成形微观组织研究[J].火箭推进,2017,43(01):55.
ZUO Wei,ZHANG Quanming,WU Wenjie,et al.Microstructure of selective laser melted nickel-based superalloy K42O2[J].Journal of Rocket Propulsion,2017,43(03):55.
备注/Memo
收稿日期：2016-07-27；修回日期：2016-10-21 作者简介：左蔚（1991—），男，硕士研究生，研究领域为液高温合金激光增材制造技术
更新日期/Last Update:
1900-01-01