航天推进技术研究院主办
[1]赵万明,史 超,唐云龙.发动机起动加速性计算参数响应特性[J].火箭推进,2019,45(05):96-102.
ZHAO Wanming,SHI Chao,TANG Yunlong.The parameter response characteristic of starting acceleration of rocket engine[J].Journal of Rocket Propulsion,2019,45(05):96-102.
点击复制
ZHAO Wanming,SHI Chao,TANG Yunlong.The parameter response characteristic of starting acceleration of rocket engine[J].Journal of Rocket Propulsion,2019,45(05):96-102.
发动机起动加速性计算参数响应特性
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
45
期数:
2019年05期
页码:
96-102
栏目:
测控与试验
出版日期:
2019-10-30
- Title:
- The parameter response characteristic of starting acceleration of rocket engine
- 文章编号:
- 1672-9374(2019)05-0096-07
- 分类号:
- 434.3
- 文献标志码:
- A
- 摘要:
- 液体火箭发动机起动加速性的数值大小反映发动机起动过程的快慢程度。发动机地面试验后计算的起动加速性结果是否准确反映发动机的固有起动特性,需结合试验系统结构组成、计算起动加速性的测量参数测量原理及阶跃响应特性等因素进行综合分析。研究用不同参数计算的起动加速性数值不同的主要原因,确定可靠的计算方法。通过分析某大型液体火箭发动机地面试验系统的推力架结构形式及传感器安装方式等机械结构因素对起动特性影响,并研究推力、转速、压力测量参数配置的信号调理器滤波特性对阶跃信号的延迟作用,分析测量系统对起动特性的影响。分析结果表明,试验系统结构因素和测量参数滤波因素是导致不同测量参数计算的发动机起动加速性不同的主要原因。对于大型液体发动机试验系统试验后,进行发动机起动加速性计算时,要综合分析试验系统结构形式、测量系统滤波特性等因素后,才能确保计算的结果准确、可信。
- Abstract:
- The speed of the rocket engine start can be reflected by the value of engine starting acceleration.Comprehensive analysis of the test system, parameter measurement of the starting acceleration and the factors of step response are necessary to the deciding of the starting characteristic.The reason of different starting acceleration value calculated by different parameters was researched to get reliable calculation method.The effect of several mechanical structure factors such as thrust measurement geometry of ground test system and sensor mouting patterns on the starting acceleration characteristic of the engine were analysed.Besides, effect of signal conditioner filter property of measuring parameter configuration on delay action of step signal was studied, which includes thrust, rotating speed and pressure.The starting acceleration characteristic of the large liquid rocket engine was also analyzed in this paper.The results of the analysis show that the main reason of different starting acceleration value calculated by different parameters are factors as structural factor of test system and filtering factor of parameter measurement.The computational result of the starting acceleration can be accurate and reliable when they are based on the analysis of structural factors of test system and filtering factors of parameter measurement system in large liquid rocket engine tests.
参考文献/References:
[1] 液体火箭发动机地面测量方法:GJB 2898[S].北京:国防科学技术工业委员会,1997.
[2] 液体火箭发动机地面稳态推力测量规范:QJ 1084[S].北京:中华人民共和国航天工业部,1987.
[3] 朱子环, 董文华, 管理.管路流体对氢氧发动机推力测量的影响分析[J].低温工程, 2008(2): 46-50.
[4] 朱子环, 蔡睿.氢氧火箭发动机高空模拟试验推力测量装置研制[J].宇航计测技术, 2016, 36(6): 50-55.
[5] 谢显奇.液氢-液氧火箭发动机的推力测量[J].导弹与航天运载技术, 1997(2): 60-62.
[6] 晏卓, 李志勋.姿控发动机试验缓变参数数据修正方法[J].火箭推进, 2018, 44(1): 87-94.YAN Z, LI Z X.Data correction methods of slowly varying parameters in attitude control engine test[J].Journal of Rocket Propulsion, 2018, 44(1): 87-94.
[7] 章萌, 唐云龙, 张小松.液体火箭发动机试验推力校准测控系统设计[J].弹箭与制导学报, 2014, 34(5): 126-130.
[8] 李正兵, 李永斌, 田宝云, 等.可调低温环境压力传感器校准装置实现[J].火箭推进, 2016, 42(4): 103-109.LI Z B, LI Y B, TIAN B Y, et al.Realization of calibration device for adjustable cryogenic pressure sensor[J].Journal of Rocket Propulsion, 2016, 42(4): 103-109.
[9] 赵万明.流量转速参数信号调理技术[J].火箭推进, 2008, 34(2): 49-54.ZHAO W M.Signalmodulating technique of flow and rotating speed parameters[J].Journal of Rocket Propulsion, 2008, 34(2): 49-54.
[10] 苏金明, 阮沈勇.MATLAB实用教程[M].北京: 电子工业出版社, 2008.
[11] 郭霄峰.液体火箭发动机试验[M].北京: 宇航出版社, 1990.
[12] 张金容, 汪亮.液体火箭发动机起动过程的动态仿真计算[J].低温工程, 2008(2): 22-27.
[13] 深圳金洪仪器技术开发有限公司.太平洋6000DAS传感器数据采集与控制系统硬件操作使用手册 [M].深圳:[s.n.],2008.
[14] 沙占友.智能传感器系统设计与应用[M].北京: 电子工业出版社, 2004.
[15] 威廉姆斯 A B.模拟滤波器与电路设计手册[M].路秋生,译.北京:电子工业出版社,2016.
相似文献/References:
[1]秦永涛,宋 阳,苏红芳,等.火箭发动机试验管道多余物人机环境控制方法[J].火箭推进,2015,41(06):80.
QIN Yongtao,SONG Yang,SU Hongfang,et al.Method of man-machine-environment control over foreign object debris in pipelines used in rocket engine test[J].Journal of Rocket Propulsion,2015,41(05):80.
[2]董 冬,张少博,刘 晓.试验状态信息管理软件设计[J].火箭推进,2013,39(06):72.
DONG Dong,ZHANG Shao-bo,LIU Xiao.Design of information management software for test status[J].Journal of Rocket Propulsion,2013,39(05):72.
[3]王军钢,赵万明,唐丽萍.提高低温压力测量准确度的方法初探[J].火箭推进,2012,38(05):65.
WANG Jun-gang,ZHAO Wan-ming,TANG Li-ping.Discussion on method of improving accuracy of pressure measurement in low temperature[J].Journal of Rocket Propulsion,2012,38(05):65.
[4]姬俊锋,吴光中,马利亚,等.液体推进剂发动机试验多工况流量控制方法[J].火箭推进,2011,37(02):71.
JI Jun-feng,WU Guang-zhong,MA Li-ya,et al.Multiple-working-conditions flowrate control for liquid engine test[J].Journal of Rocket Propulsion,2011,37(05):71.
[5]赵万明,王军钢.液体火箭发动机试验负推力修正[J].火箭推进,2010,36(06):56.
ZHAO Wan-ming,WANG Jun-gang.Correction of negative thrust in liquid rocket engine tests[J].Journal of Rocket Propulsion,2010,36(05):56.
[6]来代初,苏红军,李伟.液氧／煤油发动机煤油高低温试验工艺技术[J].火箭推进,2009,35(04):53.
Lai Daichu,Su Hongjun,Li Wei.High and low temperature test technology of
kerosene of the LOX／kerosene engine[J].Journal of Rocket Propulsion,2009,35(05):53.
[7]曹文庆,谭海林,李伟.低温发动机试验推进剂人口温度控制[J].火箭推进,2009,35(03):52.
Cao Wenqing,Tan Hailin,Li Wei.Propellant inlet temperature control
for cryogenic rocket engine tests[J].Journal of Rocket Propulsion,2009,35(05):52.
[8]赵万明.流量转速参数信号调理技术[J].火箭推进,2008,34(02):49.
Zhao Wanming.Signal modulating technique of flow and
rotating speed parameters[J].Journal of Rocket Propulsion,2008,34(05):49.
[9]张辉,郭立.液氧/煤油发动机摇摆测控系统技术要求及实现[J].火箭推进,2007,33(01):49.
Zhang hui,Guo Li.Development of the swinging measurement system for LOX/kerosene rocket engine[J].Journal of Rocket Propulsion,2007,33(05):49.
[10]胡瑛.液体火箭发动机试验数据曲线绘制软件设计[J].火箭推进,2007,33(01):55.
Hu Ying.Design of data curve drawing software for liquid rocket engine test[J].Journal of Rocket Propulsion,2007,33(05):55.
备注/Memo
收稿日期:2018-07-12; 修回日期:2019-03-31基金项目:装备预研共用技术项目(414030300101)作者简介:赵万明(1958—),男,研究员,研究领域为液体火箭发动机测量与控制
更新日期/Last Update:
2019-10-25