煤油/氧气同轴离心喷嘴燃烧数值模拟

参考文献/References:

[1] 液体火.箭发动机燃烧不稳定性[M]. 科学出版社,(美)V.杨,(美)W.E.安德松主编, 2001 [2] 液体火箭发动机气气燃烧及气气喷注技术[M].国防工业出版社,蔡国飙等著.2012. [3] 液体火箭发动机燃烧过程建模及仿真[M].国防工业出版社,王振国编著,2012. [4] 液体火箭发动机推力室设计[M].国防工业出版社,王治军著,2014. [5] 高玉闪,杜正刚,金平.气氧/甲烷同轴剪切喷注器燃烧特性数值模拟[J].火箭推进,2009,35(05):18-23+33. [5] 高玉闪, 杜正刚, 金平, 等. 气氧/甲烷同轴剪切喷注器燃烧特性数值模拟[J]. 火箭推进, 2009, 35(5): 18-23.GAO Y S, DU Z G, JIN P, et al. Numerical simulation on the combustion characteristic of shear coaxial GO₂/ GCH₄ injector[J]. Journal of Rocket Propulsion, 2009, 35(5): 18-23.[知网] [6] 高玉闪,金平,蔡国飙.气氧/甲烷与气氢/气氧喷注器燃烧特性对比研究[J].推进技术,2013,34(06):775-780. [6] 高玉闪, 金平, 蔡国飙. 气氧/甲烷与气氢/气氧喷注器燃烧特性对比研究[J]. 推进技术, 2013, 34(6): 775-780.GAO Y S, JIN P, CAI G B. Comparison of combustion characteristics for GO₂/CH₄ and GH₂/GO₂ injectors[J]. Journal of Propulsion Technology, 2013, 34(6): 775-780.[知网] [7] Culick.“Unsteady Motions in Combustion Chamber for Propulsion Systems,”AGARDograph,AG-AVT-039,Neuilly-Sur-seine,France,2006. [8] 田原,李丹琳,孙纪国.同轴剪切喷嘴高频喷注耦合燃烧不稳定分析[J].火箭推进,2014,40(03):23-28. [8] 田原, 李丹琳, 孙纪国, 等. 同轴剪切喷嘴高频喷注耦合燃烧不稳定分析[J]. 火箭推进, 2014, 40(3): 23-28.TIAN Y, LI D L, SUN J G, et al. Instability analysis on high-frequency injection-coupled combustion of shear coaxial injector[J]. Journal of Rocket Propulsion, 2014, 40(3): 23-28.[知网] [9] 曹晨,谭永华,陈建华.气喷嘴和声腔对燃烧室声学特性的影响[J].航空动力学报,2019,34(08):1836-1846. [9] 曹晨, 谭永华, 陈建华, 等. 气喷嘴和声腔对燃烧室声学特性的影响[J]. 航空动力学报, 2019, 34(8): 1836-1846.CAO C, TAN Y H, CHEN J H, et al. Effects of gas nozzle and resonators on acoustic characteristics of combustion chamber[J]. Journal of Aerospace Power, 2019, 34(8): 1836-1846.[知网] [10] 俞南嘉,鲍启林,李峰.基于PLIF技术的气氧/气甲烷同轴剪切喷嘴试验[J].航空动力学报,2018,33(10):2483-2491. [10] 俞南嘉, 鲍启林, 李峰, 等. 基于PLIF技术的气氧/气甲烷同轴剪切喷嘴试验[J]. 航空动力学报, 2018, 33(10): 2483-2491.YU N J, BAO Q L, LI F, et al. Experiment on coaxial shear injector of GO₂/GCH₄ based on PLIF[J]. Journal of Aerospace Power, 2018, 33(10): 2483-2491.[知网] [11] 韩树焘,林洁,俞南嘉.气氧/气甲烷同轴剪切双喷嘴仿真研究[J].火箭推进,2018,44(03):68-75. [11] 韩树焘, 林洁, 俞南嘉, 等. 气氧/气甲烷同轴剪切双喷嘴仿真研究[J]. 火箭推进, 2018, 44(3): 68-75.HAN S T, LIN J, YU N J, et al. Simulation study on gaseous oxygen/methane double injectors with coaxial shear[J]. Journal of Rocket Propulsion, 2018, 44(3): 68-75.[知网] [12] 刘占一,刘计武,汪广旭.气氧甲烷单喷嘴燃烧室壁面热流的测量和数值模拟[J].推进技术,2018,39(05):1033-1040. [12] 刘占一, 刘计武, 汪广旭, 等. 气氧甲烷单喷嘴燃烧室壁面热流的测量和数值模拟[J]. 推进技术, 2018, 39(5): 1033-1040.LIU Z Y, LIU J W, WANG G X, et al. Measurements and numerical simulation of wall heat fluxes in a single-element GO₂/GCH₄ rocket combustor[J]. Journal of Propulsion Technology, 2018, 39(5): 1033-1040.[知网] [13] Zhi-wei Huang, Guo-qiang He, Fei Qin.Large eddy simulation of combustion characteristics in a kerosene fueled rocket-based combined-cycle engine combustor,ActaAstronautica,Volume 12,2016,Pages 326-334,ISSN 0094-5765. [13] HUANG Z W, HE G Q, QIN F, et al. Large eddy simulation of combustion characteristics in a kerosene fueled rocket-based combined-cycle engine combustor[J]. Acta Astronautica, 2016, 127: 326-334.[LinkOut] [14] Garby R, Selle L, Poinsot T. Large-Eddy Simulation of combustion instabilities in a variable-length combustor[J]. ComptesRendusMecanique, 2013, 341(s 1–2):220–229. [14] GARBY R, SELLE L, POINSOT T. Large-Eddy Simulation of combustion instabilities in a variable-length combustor[J]. Comptes Rendus Mécanique, 2013, 341(1/2): 220-229.[LinkOut] [15] 白俊强,王波,孙智伟.使用RANS/LES混合方法对钝前缘三角翼进行数值模拟(英文)[J].空气动力学学报,2012,30(03):373-379. [15] BAI J Q, WANG B, SUN Z W. The application of numerical simulation of delta wing with blunt leading edge using RANS/LES hybrid method[J]. 空气动力学学报, 2012, 30(3): 373-379.BAI J Q, WANG B, SUN Z W. The application of numerical simulation of delta wing with blunt leading edge using RANS/LES hybrid method[J]. Acta Aerodynamica Sinica, 2012, 30(3): 373-379.[知网] [16] 王明涛,徐惊雷,于洋.基于DOE优化湍流模型的SERN分离点预测数值模拟与实验验证[J].推进技术,2014,35(03):289-295. [16] 王明涛, 徐惊雷, 于洋, 等. 基于DOE优化湍流模型的SERN分离点预测数值模拟与实验验证[J]. 推进技术, 2014, 35(3): 289-295.WANG M T, XU J L, YU Y, et al. Numerical simulation and experimental validation of SERN separation with optimized turbulence model based on DOE method[J]. Journal of Propulsion Technology, 2014, 35(3): 289-295.[知网] [17] 余秋阳,包芸,王圣业.B-C转捩模型的DDES方法模拟转捩大分离流动[J].计算物理,2020,37(01):46-54. [17] 余秋阳, 包芸, 王圣业, 等. B-C转捩模型的DDES方法模拟转捩大分离流动[J]. 计算物理, 2020, 37(1): 46-54.YU Q Y, BAO Y, WANG S Y, et al. DDES for separated transitional flows based on B-C transition model[J]. Chinese Journal of Computational Physics, 2020, 37(1): 46-54.[知网] [18] Wang X, Wang Y, Yang V.Geometric Effects on Liquid Oxygen/Kerosene Bi-Swirl Injector Flow Dynamics at Supercritical Conditions[J]. AIAA Journal, 2017:1-9.[20]Spalding D.A simple model for the rate of turbulent combustion[C]// Aerospace Sciences Meeting. The Royal Society, 2013. [21] 王枫, 李龙飞, 张贵田. 喷嘴结构对液氧煤油火箭发动机高频燃烧不稳定性的影响[J]. 实验力学, 2012, 27(2):178-182. [21] 王枫, 李龙飞, 张贵田. 喷嘴结构对液氧煤油火箭发动机高频燃烧不稳定性的影响[J]. 实验力学, 2012, 27(2): 178-182.WANG F, LI L F, ZHANG G T. Influence of geometrical structure of coaxial injector on high-frequency combustion instability for staged combustion LOX/kerosene rocket engine[J]. Journal of Experimental Mechanics, 2012, 27(2): 178-182.[知网] [22] Oschwald M, Smith J J, Branam R, et al. Injection of fluid into supercritical environment[J]. combustion science and technology, 2006.