航天推进技术研究院主办
[1]吴晓明,彭 超,王 玉,等.基于仿真模拟壳体缺陷机理分析及工艺改进[J].火箭推进,2021,47(04):96-102.
WU Xiaoming,PENG Chao,WANG Yu,et al.Analysis of casting defect mechanism and optimization of complex shell casting based on numerical simulation[J].Journal of Rocket Propulsion,2021,47(04):96-102.
点击复制
WU Xiaoming,PENG Chao,WANG Yu,et al.Analysis of casting defect mechanism and optimization of complex shell casting based on numerical simulation[J].Journal of Rocket Propulsion,2021,47(04):96-102.
基于仿真模拟壳体缺陷机理分析及工艺改进
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
47
期数:
2021年04期
页码:
96-102
栏目:
工艺与材料
出版日期:
2021-08-31
- Title:
- Analysis of casting defect mechanism and optimization of complex shell casting based on numerical simulation
- 文章编号:
- 1672-9374(2021)04-0096-07
- 分类号:
- V462
- 文献标志码:
- A
- 摘要:
- 为了提高某型号发动机低压壳体铸件合格率,对壳体加工后轴承冷却孔缺陷问题进行分析,提出了工艺改进措施。采用内窥镜检查、剖切检查,确定缺陷形貌及产生位置,运用仿真模拟软件对原铸造工艺方案进行模拟,基于凝固过程仿真结果以及产品结构分析,确定了缺陷产生原因为温度场不协调及缺乏有效补缩源。针对缺陷产生原因提出工艺改进措施,改进冷铁设计及加快充型速度优化凝固温度场,添加冒口增加缺陷部位补缩能力。改进措施应用后,仿真模拟结果显示,原最先凝固区域凝固时间延迟,冒口及缺陷上方均可以提供补缩,建立了顺畅的补缩通道,消除了原问题部位的疏松缺陷。小批量产品验证结果表明,产品合格率大幅提高,加工后未见疏松缺陷问题,解决了型号研制问题,保证产品批量交付。
- Abstract:
- For improving the qualification rate of complex shell,the mechanism of fluorescence loosen defects was described by using section check,endoscopy and numerical simulation.The process improvement measures were put forward.It was determined that the causes of defects were uncoordinated temperature field and lack of effective feeding source based on the simulation results of solidification process and the analysis of product structure.Through optimizing temperature field,adding source to feed and the feeding capacity of defect was enhanced.By using above measures,the simulation results show that the solidification time of the original first solidification area is delayed,a smooth feeding channel is established and the loose defects of the original problem area are eliminated.The verification results of small batch products show that the problem of fluorescence defects is eliminated,the qualified rate of products is improved and products are delivered in time.
参考文献/References:
[1] 中国机械工程学会铸造分会.铸造手册(第3卷):铸造非铁合金[M].北京:机械工业出版社,2011.
[2] 隋育栋,王渠东.铸造耐热铝合金在发动机上的应用研究与发展[J].材料导报,2015,29(3):14-19.
[3] 杨守杰,戴圣龙.航空铝合金的发展回顾与展望[J].材料导报,2005,19(2):76-80.
[4] 范晓明.金属凝固理论与技术[M].2版.武汉:武汉理工大学出版社,2019.
[5] 蔡启舟,吴树森.铸造合金原理及熔炼[M].北京:化学工业出版社,2010.
[6] 阚精诚,刘继广,杨友文,等.铸造充型过程数值模拟技术的研究现状与展望[J].热加工工艺,2019,48(13):9-13.
[7] 周建新,廖敦明.铸造CAD/CAE[M].北京:化学工业出版社,2009.
[8] 王玉,吴晓明,任新苗,等.铸件缺陷机理分析及凝固温度场工艺优化[J].火箭推进,2020,46(3):83-89.
WANG Y,WU X M,REN X M,et al.Analysis of casting defect mechanism and optimization of solidification temperature field[J].Journal of Rocket Propulsion,2020,46(3):83-89.
[9] 杨欢庆.航天液体动力高性能复杂铸件铸造CAD/CAE技术应用[C]//2019中国铸造活动周论文集.武汉:[s.n.],2019.
[10] 黄进,张勇佳,殷亚军,等.基于华铸CAE的航空发动机铝合金传动件铸造数值模拟与工艺优化[J].特种铸造及有色合金,2019,39(8):846-849.
[11] 孙浩,崔恩强,张娜,等.ZL205A合金舱体低压工艺设计及数值仿真应用[J].上海航天,2019,36(2):131-135.
[12] 夏伟,杜航,徐慧,等.基于铸造仿真技术的铝合金缸盖缩孔缺陷控制[J].特种铸造及有色合金,2019,39(11):1202-1204.
[13] 文波,夏志单,季珊林,等.复杂薄壁框类铝合金铸件工艺设计及数值模拟[J].特种铸造及有色合金,2018,38(7):768-771.
[14] 钱怡君,程兆虎,于浩.数值模拟在铸造中的应用进展[J].精密成形工程,2012,4(4):39-43.
[15] 周建新.铸造计算机模拟仿真技术现状及发展趋势[J].铸造,2012,61(10):1105-1115.
[16] 郭维,白东安.液体火箭发动机用超低比转速离心泵优化设计[J].火箭推进,2011,37(5):19-23.
GUO W,BAI D A.Optimal.design of ultra-low specific speed centrifugal pump for LRE[J].Journal of Rocket Propulsion,2011,37(5):19-23.
[17] 丛伟.模数法在铸钢件冒口设计中的应用[J].沈阳航空工业学院学报,2002,19(4):17-19.
[18] 赫振梅,李卿卿,李晓东.冒口模数定量计算法在铸钢工艺设计上的应用[J].铸造技术,2020,41(11):1037-1041.
[19] 徐巧志,王瞳,沈旭,等.基于距离场的铸钢件冒口设计方法及应用[J].铸造,2018,67(6):479-482.
[20] 纪艳卿,陈鹏荣.高强不锈钢离心轮浇冒口的设计与计算[J].火箭推进,2015,41(4):90-94.
JI Y Q,CHEN P R.Design and calculation of casting head for high strength stainless steel centrifugal impeller[J].Journal of Rocket Propulsion,2015,41(4):90-94
备注/Memo
收稿日期:2020-12-11
基金项目:国家重点研发计划项目(2020YFB1710100)
作者简介:吴晓明(1991—),男,硕士,研究领域为液体火箭发动机型号管理及铸造工艺。
更新日期/Last Update:
1900-01-01