航天推进技术研究院主办
[1]徐文,高新妮,胡保林,等.离心式喷嘴一次破碎与二次雾化的数值模拟[J].火箭推进,2022,48(04):13-20.
XU Wen,GAO Xinni,HU Baolin,et al.Numerical simulation of primary breakup and secondary atomization for centrifugal nozzle[J].Journal of Rocket Propulsion,2022,48(04):13-20.
点击复制
XU Wen,GAO Xinni,HU Baolin,et al.Numerical simulation of primary breakup and secondary atomization for centrifugal nozzle[J].Journal of Rocket Propulsion,2022,48(04):13-20.
离心式喷嘴一次破碎与二次雾化的数值模拟
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
48
期数:
2022年04期
页码:
13-20
栏目:
目次
出版日期:
2022-08-21
- Title:
- Numerical simulation of primary breakup and secondary atomization for centrifugal nozzle
- 文章编号:
- 1672-9374(2022)04-0013-08
- 分类号:
- V19
- 文献标志码:
- A
- 摘要:
- 离心式喷嘴具有轴向较大的旋转速度分量,在其诱导下会产生空气芯,使得喷嘴出口处产生空心锥液膜。空心锥液膜会发生一次破碎和二次雾化,流动行为较为复杂。采用流体体积函数转换成离散相模型(VOF-to-DPM)这种结合了流体体积法和欧拉—拉格朗日方法的多相流模型,并结合自适应网格细化方法,针对双切向孔离心式喷嘴雾化流场特性展开研究。分析了空心锥液膜的产生、发展到发生一次破碎和二次雾化的全过程。结果表明:基于VOF-to-DPM多相流模型模拟所得喷嘴雾化角与实验所测得雾化角基本吻合,验证了所提数值模型的可靠性 计算过程中自适应网格的存在可以更加准确地模拟液膜的形成 空心锥液膜从发展到发生一次破碎的过程中,随着质量流量的增加而更加稳定 液膜二次雾化所产生的液体颗粒总数随着质量流量的增加而减少,且颗粒粒径大小分布更加均匀。
- Abstract:
- The centrifugal nozzle has a large axial rotation velocity component, which induces an air core to produce a hollow conical liquid film at the nozzle outlet.The hollow conical liquid film will undergo the primary breakup and secondary atomization, and the flow behavior is complex.In this paper,a multiphase flow model named Volume of Fluid-to-Discrete Phase Model(VOF-to-DPM)is adopted and it combines the Volume of Fluid method and the Euler-Lagrange method.Combined with the adaptive mesh refinement method,the characteristics of atomization flow field of the centrifugal nozzle with double tangential holes are studied.The whole process from the generation, development to the primary breakup and secondary atomization of the hollow conical liquid film is analyzed.The results show that the atomization angle of the nozzle simulated based on the VOF-to-DPM multiphase flow model is basically consistent with the atomization angle measured by the experiment, which verifies the reliability of the numerical model in this paper.The existence of adaptive grid in the calculation process can simulate the formation of the liquid filmmore accurately.The hollow conical liquid film is more stable with the increase of mass flow during the process from development to primary breakup.The total number of liquid particles produced by the liquid film secondary atomization decreases with the increase of mass flow rate, and the particle size distribution is more uniform.
参考文献/References:
[1] 薛帅杰,刘红军,洪流,等.厚液膜敞口型离心喷嘴自激振荡特性试验[J].航空学报,2018,39(9):122198.
[2] BANG B H,KIM Y I,AHN C S,et al.Theoretical model of swirling thick film flow inside converging nozzles of various geometries[J].Fuel,2020,280:118215.
[3] NOURI-BORUJERDI A,KEBRIAEE A.Numerical simulation of laminar and turbulent two-phase flow in pressure-swirl atomizers[J].AIAA Journal,2012,50(10):2091-2101.
[4] AMINI G.Liquid flow in a simplex swirl nozzle[J].International Journal of Multiphase Flow,2016,79:225-235.
[5] 申力鑫,邢菲,秦腊,等.双层旋转锥形液膜一次破碎特性数值研究[J].航空学报,2021,42(12):98-110.
[6] DOMBROWSKI N,HASSON D.The flow characteristics of swirl(centrifugal)spray pressure nozzles with low viscosity liquids[J].AIChE Journal,1969,15(4):604-611.
[7] 宋大亮,凌前程,章荣军.双组元离心式喷嘴外喷嘴流动数值模拟分析[J].火箭推进,2018,44(4):10-15.
SONG D L,LING Q C,ZHANG R J.Numerical analysis on flow characteristics of outer nozzle of bipropellant pressure-swirl injector[J].Journal of Rocket Propulsion,2018,44(4):10-15.
[8] NATARAJAN V,UNNIKRISHNAN U,HWANG W S,et al.Numerical study of two-phase flow dynamics and atomization in an open-type liquid swirl injector[J].International Journal of Multiphase Flow,2021,143:103702.
[9] BATTISTONI M,GRIMALDI C N.Numerical analysis of injector flow and spray characteristics from diesel injectors using fossil and biodiesel fuels[J].Applied Energy,2012,97:656-666.
[10] 吴高杨,郑刚,聂万胜,等.螺旋离心式喷嘴内部流动过程数值仿真研究[J].火箭推进,2015,41(4):13-18.
WU G Y,ZHENG G,NIE W S,et al.Numerical simulation of flow process in screw centrifugal nozzle[J].Journal of Rocket Propulsion,2015,41(4):13-18.
[11] 王凯,杨国华,李鹏飞,等.离心式喷嘴内部流动过程数值仿真分析[J].火箭推进,2016,42(4):14-20.
WANG K,YANG G H,LI P F,et al.Numerical simulation of internal flow process in pressure swirl injector[J].Journal of Rocket Propulsion,2016,42(4):14-20.
[12] WANG L,CHEN L F,FANG B.Numerical simulation of internal flow and external atomization in pressure swirl nozzle[J].Journal of Physics:Conference Series,2019,1300(1):012082.
[13] 潘华辰,周泽磊,刘雷.关键结构参数对离心式雾化喷嘴雾化效果的影响研究[J].机械工程学报,2017,53(2):199-206.
[14] KUOSMANEN N.Black liquor spray Simulation[Z].2021.
[15] BALASUBRAMANIAN A K,KUMAR V,NAKOD P,et al.Multiscale modelling of a doublet injector using hybrid VOF-DPM method[C]//AIAA Scitech 2020 Forum.Reston,Virginia:AIAA,2020.
[16] NODA J,MIYAZAKI K,AOKI K,et al.Combustion technology of oil-fired combustors for dual fuel-fired gas turbines[J].Mitsubishi Heavy Industries Technical Review,2020,57(1):1.
[17] VANDERPLOW B,SOLOVIEV A V,DEAN C W,et al.Potential effect of bio-surfactants on sea spray generation in tropical cyclone conditions[J].Scientific Reports,2020,10:19057.
[18] ZHOU R,SHEN C B,JIN X.Numerical study on the morphology of a liquid-liquid pintle injector element primary breakup spray[J].Journal of Zhejiang University:SCIENCE A,2020,21(8):684-694.
[19] FEVRALSKIKH A V.Numerical simulation of splashing landing gear on an amphibious aircraft air cushion[J].IOP Conference Series:Materials Science and Engineering,2021,1027(1):012005.
[20] NAZEER Y H,EHMANN M,SAMI M,et al.Atomization mechanism of internally mixing twin-fluid Y-jet atomizer[J].Journal of Energy Engineering,2021,147(1):04020075.
[21] Ansys Inc.ANSYS fluent theory guide(2020 R2)[Z].2020.
备注/Memo
收稿日期:2022-04-22 修回日期:2022-06-06
基金项目:上海市自然科学基金(21ZR1462000)
作者简介:徐文(1996—),女,硕士,研究领域为气液两相流的数值模拟仿真。
通信作者:王莹(1984—),女,博士,副教授,研究领域为多相流和流动控制。
更新日期/Last Update:
1900-01-01