航天推进技术研究院主办
[1]史 勇,何卫东,卢 博.插铣技术在诱导轮加工中的应用[J].火箭推进,2014,40(01):76-80.
SHI Yong,HE Wei-dong,LU Bo.Application of plunge milling in inducer machining[J].Journal of Rocket Propulsion,2014,40(01):76-80.
点击复制
SHI Yong,HE Wei-dong,LU Bo.Application of plunge milling in inducer machining[J].Journal of Rocket Propulsion,2014,40(01):76-80.
插铣技术在诱导轮加工中的应用
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
40
期数:
2014年01期
页码:
76-80
栏目:
工艺与材料
出版日期:
2014-02-28
- Title:
- Application of plunge milling in inducer machining
- 关键词:
- 插铣技术; 诱导轮; 液体火箭发动机涡轮泵
- Keywords:
- plunge milling; inducer; turbopump of rocket engine
- 分类号:
- V434-34
- 文献标志码:
- A
- 摘要:
- 介绍了采用UG TCL程序算法计算仿真插铣诱导轮的加工工艺。通过DEFORM软件计算插铣诱导轮工艺参数，并经工艺优化得到了一套插铣加工诱导轮的最佳工艺规范。采用该规范加工的诱导轮满足设计要求。装配该诱导轮的发动机通过了热试车考核。
- Abstract:
- A UG TCL-based calculating method of plunge milling in inducer machining is introduced. DEFORM software is used to calculate the technological parameters of inducer plunge milling. A process specification for inducer plunge milling was obtained after process optimization. The inducer machined with the process specification met the design requirements, and passed the engine hot test.
参考文献/References:
[1]耿国盛, 徐九华, 傅玉灿. 高速铣削近α钛合金的切削温度研究[J]. 机械科学与技术, 2006, 15(3): 229-332.
[2]陈皓晖, 刘华明, 孙春华. 国内外叶轮数控加工发展现状[J]. 航天制造技术, 2002 (2): 45-48.
[3]胡创国, 张定华, 任军学. 开式整体叶盘通道插铣粗加技术的研究[J]. 中国机械工程, 2007, 18(2): 153-155.
[4]单晨伟, 任军学, 张定华. 开式整体叶盘四坐标侧铣开槽粗加工轨迹规划[J]. 中国机械工程, 2007, 18(16): 1917- 1920.
[5]任军学, 张定华, 王增强. 整体叶盘数控加工技术研究[J].航空学报, 2004, 25(2): 205-208.
[6]许祥泰, 刘艳芳. 数控实用加工技术[M]. 北京: 机械工业出版社， 2000.
[7]张宪. 插铣法的特点与应用[J]. 工具展望, 2004 (4): 12.
[8]丰飞. 用户宏程序在数控加工中的应用[J]. 新技术新工艺, 2006 (1): 41-43.
[9]孙德茂. 插铣法挖腔用户宏程序的编程[J].模具工程, 2005 (10): 57-60.
[10]王庭俊. 基于宏程序铣削椭圆台[J]. 机械制造与自动化,2006 (3): 120-125.
相似文献/References:
[1]唐 飞,李家文,李 永,等.热力学效应对低温诱导轮旋转汽蚀影响的数值研究[J].火箭推进,2013,39(02):29.
TANG Fei,LI Jia-wen,LI Yong,et al.Influence of thermodynamics effect on inducer rotating cavitation under low temperature condition[J].Journal of Rocket Propulsion,2013,39(01):29.
[2]唐 飞,李家文,李 永,等.提高液体火箭发动机诱导轮汽蚀性能的研究[J].火箭推进,2013,39(03):44.
TANG Fei,LI Jia-wen,LI Yong,et al.Study on improving cavitation performance of inducer for liquid rocket engine[J].Journal of Rocket Propulsion,2013,39(01):44.
[3]张翠儒,宋 勇,毋 杰,等.一种平板螺旋式诱导轮的扬程计算法[J].火箭推进,2013,39(05):51.
ZHANG Cui-ru,SONG Yong,WU Jie,et al.A calculation method of delivery lift of flat-plate helical inducer[J].Journal of Rocket Propulsion,2013,39(01):51.
[4]庄宿国,罗 鹏,侯宁涛,等.基于Pro/E平台的诱导轮参数化造型软件开发[J].火箭推进,2014,40(03):68.
ZHUANG Su-guo,LUO Peng,HOU Ning-tao,et al.Parametrization sculpting software development
for inducer based on Pro/E[J].Journal of Rocket Propulsion,2014,40(01):68.
[5]叶汉玉,李家文,李 欣.诱导轮旋转汽蚀数值模拟[J].火箭推进,2014,40(04):43.
YE Han-yu,LI Jia-wen,LI Xin.Numerical simulations of rotating cavitation in inducer[J].Journal of Rocket Propulsion,2014,40(01):43.
[6]侯 杰,于海力,杨 敏.低汽蚀余量高速泵诱导轮研究[J].火箭推进,2014,40(06):16.
HOU Jie,YU Hai-li,YANG Min.Study of inducers for low-NPSHr high-speed pumps[J].Journal of Rocket Propulsion,2014,40(01):16.
[7]宋沛原,李家文,唐 飞.轮毂形状对诱导轮性能的影响[J].火箭推进,2012,38(02):38.
SONG Pei-yuan,LI Jia-wen,TANG Fei.Effect of hub shape on performance of inducer[J].Journal of Rocket Propulsion,2012,38(01):38.
[8]褚宝鑫,须 村,张晓娜,等.诱导轮空化对流固耦合应力分析的影响[J].火箭推进,2012,38(02):44.
CHU Bao-xin,XU Cun,ZHANG Xiao-na,et al.Influence of inducer cavitation on fluid-solid coupled stress analysis[J].Journal of Rocket Propulsion,2012,38(01):44.
[9]唐 飞,李家文.诱导轮平面叶栅汽蚀不稳定现象的数值分析[J].火箭推进,2011,37(01):34.
TANG Fei,LI Jia-wen.Numerical analysis of instable cavitation phenomenon in 2D blade cascade of inducer[J].Journal of Rocket Propulsion,2011,37(01):34.
[10]张召磊,张 楠,窦 唯,等.诱导轮对高速离心泵性能的影响分析[J].火箭推进,2011,37(03):26.
ZHANG Zhao-lei,ZHANG Nan,DOU Wei,et al.Impact of inducer on characteristic of high-speed centrifugal pump[J].Journal of Rocket Propulsion,2011,37(01):26.
备注/Memo
收稿日期：2013-09-23；修回日期：2013-10-16 作者简介：史勇（1983—），男，工程师，研究领域为数控加工工艺
更新日期/Last Update:
1900-01-01