航天推进技术研究院主办
[1]沈继彬,曾晓军,曹庆红.泵前管道波纹管对推力测量的影响分析[J].火箭推进,2015,41(04):95-99.
SHEN Jibin,ZENG Xiaojun,CAO Qinghong.Analysis of effects of bellows in front of pump on thrust measurement[J].Journal of Rocket Propulsion,2015,41(04):95-99.
点击复制
SHEN Jibin,ZENG Xiaojun,CAO Qinghong.Analysis of effects of bellows in front of pump on thrust measurement[J].Journal of Rocket Propulsion,2015,41(04):95-99.
泵前管道波纹管对推力测量的影响分析
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
41
期数:
2015年04期
页码:
95-99
栏目:
测控与试验
出版日期:
2015-09-30
- Title:
- Analysis of effects of bellows in front of pump on thrust measurement
- Keywords:
- bellows; thrust measurement; negative thrust correction
- 分类号:
- V434-34
- 文献标志码:
- A
- 摘要:
- 液体火箭发动机试验推力测量的准确性对评价发动机性能意义重大。为减小 1 200 kN液氧/煤油发动机地面试验时由于试验系统的原因对发动机推力测量准确性带来的影响和提高推力测量精度，针对1 200 kN液氧/煤油发动机试验台的推力测量系统，通过理论分析和试验验证的方法分析了泵前管道推力分离面上的2台波纹管的受力状态及波纹管在低温状态和受压状态下对推力测量的影响，获得了波纹管的竖向推力损失、低温与常温推力原位校准斜率修正系数、负推力修正系数等重要数据，并提出了波纹管安装固定要求，为修正 1 200 kN液氧/煤油发动机推力测量数据、提高发动机推力测量准确性提供依据。
- Abstract:
- Thrust measurement in LRE test process is significant to estimate the LRE performance. To decrease the influence of test system on thrust measurement accuracy and improve thrust measurement accuracy in ground test of 120 t LOX/Kerosene engine, the forced state of two bellows before pump and the influencing of the bellows in low temperature and pressure status on thrust measurement were analyzed with theoretical analysis and test verification method. The longitudinal thrust loss, thrust local calibration coefficient at low/normal temperature, and negative thrust correction coefficient were achieved. The fixing requirements of the bellows was proposed to ensure the accuracy of thrust measurement data in test process of 120 t LOX/kerosene rocket engine.
参考文献/References:
[1]张贵田. 高压补燃液氧煤油发动机[M]. 北京: 国防工业出版社, 2005.
[2]郭霄峰. 液体火箭发动机试验[M]. 北京: 宇航出版社,1990.
[3]谢显奇. 液氢-液氧火箭发动机的推力测量[J]. 导弹与航天运载技术, 1997 (2): 49-62.
[4]付国防. 大型热油泵入口管系的柔性设计[J]. 炼油技术与工程, 2004 (7): 39-42.
[5]王争. 小推力液体火箭发动机推力测量研究[D]. 西安: 西北工业大学, 2003.
[6]BLUMBER J B. Testing of a magnetically levitated rocket thrust measurement system demonstrator for NASA[D]. Blacksburg: Virginia Polytechnic Institute and State University, 2002
[7]RUNYAN R B, RYND J P, Jr, SEELY J F. Thrust stand design principles, AIAA-92-3976[R]. Reston: AIAA, 1992.
[8]李海涛. 火箭发动机推力矢量测量理论、方法与自动测试技术研究[D]. 长沙: 国防科学技术大学， 2005.
[9]赵宝林, 马凤琴, 陈述曾. 波纹管补偿器在管网中静压轴向推力的计算[J]. 华北水利水电学院学报, 2005 (4):18- 20.
[10]李永生, 李建国. 波形膨胀节使用技术[M]. 北京: 化学工业出版社, 2000.
[11]朱益民. 波纹管的动静力分析[D]. 北京: 清华大学, 1989.
[12]段玫, 钟玉平, 金桂筠, 等. 波纹管带压刚度研究[J]. 舰船科学技术, 2001 (2): 55-59.
[13]陈晔, 李永生, 刘艳江, 等. 用ANSYS软件对U形波纹管的有限元分析[J]. 压力容器, 2000 (3): 34-36.
相似文献/References:
[1]朱舒扬.全尺寸超燃冲压发动机推力测量台架研制[J].火箭推进,2015,41(05):106.
ZHU Shuyang.Development of thrust measurement platform
for full-scale scramjet[J].Journal of Rocket Propulsion,2015,41(04):106.
[2]闫 松,谭永华,陈建华.高压金属软管应力及参数敏感度分析[J].火箭推进,2013,39(05):60.
YAN Song,TAN Yong-hua,CHEN Jian-hua.Stress and parameter sensitivity analysis of high-pressure metal hose[J].Journal of Rocket Propulsion,2013,39(04):60.
[3]闫 松,谭永华,陈建华.波纹管流体诱导振动研究进展[J].火箭推进,2014,40(02):16.
YAN Song,TAN Yong-hua,CHEN Jian-hua.Research progress of flow-induced vibration of bellows[J].Journal of Rocket Propulsion,2014,40(04):16.
[4]黄子惟,田松岩,商圣飞.基于双光束干涉原理的微小推力测量系统实验研究[J].火箭推进,2014,40(05):80.
HUANG Zi-wei,TIAN Song-yan,SHANG Sheng-fei.Experimental investigation on micro-thrust measurement system based on double-beam interference principle[J].Journal of Rocket Propulsion,2014,40(04):80.
[5]朱子环,耿卫国,管 理,等.某型号大推力火箭发动机试验推力测量不确定度评定[J].火箭推进,2012,38(05):81.
ZHU Zi-huan,GENG Wei-guo,GUAN Li,et al.Assessment of thrust measurement uncertainty for test of large thrust rocket engine[J].Journal of Rocket Propulsion,2012,38(04):81.
[6]朱子环.液体火箭发动机试验推力测量传感器并联影响研究[J].火箭推进,2010,36(02):59.
Zhu Zihuan.Investigation of parallel connection of thrust sensors on measurement precision in liquid rocket engine tests[J].Journal of Rocket Propulsion,2010,36(04):59.
[7]何志勇,周云端.UG二次开发在波纹管设计中的应用[J].火箭推进,2010,36(03):33.
He Zhiyong,Zhou Yunduan.Design of bellows based on UG secondary development technique[J].Journal of Rocket Propulsion,2010,36(04):33.
[8]赵万明,王军钢.液体火箭发动机试验负推力修正[J].火箭推进,2010,36(06):56.
ZHAO Wan-ming,WANG Jun-gang.Correction of negative thrust in liquid rocket engine tests[J].Journal of Rocket Propulsion,2010,36(04):56.
[9]刘丽宁,李志勋.双曲梁传感器推力测量技术应用[J].火箭推进,2009,35(06):57.
[10]付正.2MN推力测量自动校准系统设计[J].火箭推进,2008,34(06):36.
Fu Zheng.Design of 2MN thmst measurement
auto—calibration system[J].Journal of Rocket Propulsion,2008,34(04):36.
备注/Memo
收稿日期：2014-12-04；修回日期：2015-06-07 基金项目：国防计量基础科研项目（J032013Z005） 作者简介：沈继彬（1982—），男，硕士，工程师，研究领域为液体火箭发动机试验技术
更新日期/Last Update:
1900-01-01