航天推进技术研究院主办
[1]左蔚,张权明,吴文杰,等.K42O2高温合金激光选区熔化成形微观组织研究[J].火箭推进,2017,43(01):55-59.
ZUO Wei,ZHANG Quanming,WU Wenjie,et al.Microstructure of selective laser melted nickel-based superalloy K42O2[J].Journal of Rocket Propulsion,2017,43(01):55-59.
点击复制
ZUO Wei,ZHANG Quanming,WU Wenjie,et al.Microstructure of selective laser melted nickel-based superalloy K42O2[J].Journal of Rocket Propulsion,2017,43(01):55-59.
K42O2高温合金激光选区熔化成形微观组织研究
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
43
期数:
2017年01期
页码:
55-59
栏目:
工艺与材料
出版日期:
2017-04-01
- Title:
- Microstructure of selective laser melted nickel-based superalloy K42O2
- Keywords:
- selective laser melting; K4202 nickel-based superalloy; microstructure characteristic; evolution law
- 分类号:
- V261-34
- 文献标志码:
- A
- 摘要:
- 为了实现激光选区熔化成形(SLM)这项新工艺在液体火箭发动机高温合金结构上的推广应用,明晰其强化机理以及研究相应的热处理制度,对激光选区熔化快速凝固条件下组织形成及演化规律、第二相析出特点进行了分析和讨论.采用SLM成形K4202镍基高温合金试样,通过光学显微镜(OM)、扫描电镜(SEM)及X射线衍射(XRD)等理化分析手段,将基于ANSYS生死单元技术的温度场数值模拟结果和经典凝固理论相结合,揭示了其组织特征及演化规律:沉积态表现为外延生长柱状晶,层间可见层带组织,顶部出现转向枝晶和二次枝晶臂,γ'强化相和碳化物的析出受到抑制.
- Abstract:
- In order to realize the popularization and application of selective laser melting (SLM) innovative process in the liquid rocket superalloy structure,its strengthen mechanism and corresponding heat treatment regime are revealed.The microstructure formation,evolution laws and phase formation characteristics of SLM under rapid solidification condition are discussed and analyzed in this article.The optical micrograph (OM),scanning electron microscopy (SEM),X-ray diffraction (XRD),and ANSYS thermal simulation combining with classic solidification theory were adopted on a K4202 superalloy sample fabricated by SLM to reveal its microstructure characteristics and evolution laws.It was observed that the as-deposited microstructure was out-of-equilibrium,composed of epitaxial elongated columnar crystal paralleling to the deposition direction,but at the top of the SLM sample the dendrites grew along the laser scanning direction and appeared as secondary dendrite arm,and the precipitated phases were inhibited.
参考文献/References:
[1]王华明. 高性能大型金属构件激光增材制造: 若干材料基础问题[J]. 航空学报, 2014, 35(10): 2690-2698.
[2]黄卫东, 林鑫, 陈静, 等. 激光立体成形[M].西安: 西北工业大学出版社, 2007.
[3]VILAROA T, COLIN C, BARTOUT J D, et al. Sennour.Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy [J]. Materials science and engineering A, 2012, 534: 446-451.
[4]MAISONNEUVE J. Direct manufacturing of aeronautical parts in Ti-6Al-4V and IN718: direct metal deposition and selective laser melting[D]. France: Mines-Paris Tech, 2008.
[5]VILARO T. Direct manufacturing of aeronautical parts in Nimonic 263 andA360 through selective laser melting: thermal, microstructural and mechanical approaches[D]. France: Mines Paris Tech, 2011.
[6]林鑫, 杨海欧, 陈静, 等. 激光快速成形过程中316L不锈钢显微组织的演变[J]. 金属学报. 2006, 42(4): 361-368.
[7]TRIVEDI R, KURZ W. Solidification microstructures: A conceptual approach[J]. Acta metallurgica et materialia, 1994, 42(1): 15-23.
[8]胡汉起. 金属凝固原理[M]. 北京: 机械工业出版社, 1999:116-130.
[9]王建明, 杨舒宇. 镍基铸造高温合金[M]. 北京: 冶金工业出版社, 2014: 67-82.
[10]姜晓亚. 激光成形修复DZ125合金裂纹形成机理及其控制[D].西安： 西北工业大学, 2016.
相似文献/References:
[1]左 蔚,赵 剑,白 静,等.激光选区熔化菱形正十二面体点阵材料的承载与失效特性[J].火箭推进,2020,46(05):87.
ZUO Wei,ZHAO Jian,BAI Jing,et al.Research on bearing and disable properties of laser selective melting rhombohedral dodecahedral lattice materials[J].Journal of Rocket Propulsion,2020,46(01):87.
[2]杨兴远,魏红伟,张静,等.激光选区熔化成形TA7钛合金各向异性分析[J].火箭推进,2023,49(04):99.
YANG Xingyuan,WEI Hongwei,ZHANG Jing,et al.Anisotropy analysis of laser selective melting forming TA7 titanium alloy[J].Journal of Rocket Propulsion,2023,49(01):99.
[3]左蔚,张权明,雷玥,等.K4202镍基高温合金激光选区熔化成形室温拉伸性能研究[J].火箭推进,2017,43(03):53.
ZUO Wei,ZHANG Quanming,LEI Yue,et al.Mechanical properties of selective laser melted and shaped K4202 nickel-based superalloy at room temperature[J].Journal of Rocket Propulsion,2017,43(01):53.
备注/Memo
收稿日期：2016-07-27；修回日期：2016-10-29 基金项目：国防科工局技术基础科研项目（JSJC2013203B016） 作者简介：左蔚（1991—），男，硕士，研究领域为高温合金激光增材制造技术
更新日期/Last Update:
1900-01-01