PDF下载 分享
[1]陈彦林,林 源,邓博文.三维模型质量检查系统的研究与实践[J].火箭推进,2018,44(02):88-94.
　CHEN Yanlin,LIN Yuan,DENG Bowen.Research and practice of quality inspection system for three-dimensional model[J].Journal of Rocket Propulsion,2018,44(02):88-94.
点击复制

三维模型质量检查系统的研究与实践

《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V] 卷: 44 期数: 2018年02期 页码: 88-94 栏目: 测控与试验 出版日期: 2018-04-30
Title:
Research and practice of quality inspection system for three-dimensional model
文章编号:
1672-9374(2018)02-0088-07
作者:
陈彦林; 林 源; 邓博文
西安航天动力研究所,陕西 西安 710100
Author(s):
CHEN Yanlin; LIN Yuan; DENG Bowen
Xi'an Aerospace Propulsion Institute,Xi'an 710100,China
关键词:
液体火箭发动机;  三维模型;  质量检查
Keywords:
liquid rocket engine;  three-dimensional model;  quality inspection
分类号:
V430-34
文献标志码:
A
摘要:
随着MBD技术的应用,三维模型成为产品信息表达的唯一源头、设计制造信息传递的唯一载体、生产制造的唯一依据,其质量日益重要。针对液体火箭发动机三维模型质量人工检查存在的问题,依据发动机设计、工艺、制造规范以及CAD/CAM数据质量检查方面的标准,研究并开发了三维模型质量检查系统,并在液体火箭发动机研制过程中进行了应用,实现了三维模型质量的高效、快速检查,减少由于三维模型质量问题引起的设计反复,促进了发动机三维模型设计质量的提升,确保三维模型满足后续智能制造要求,缩短产品的研制周期。
Abstract:
With the application of MBD technology,the three-dimensional model becomes the only source of product information expression,the only carrier for designing and manufacturing information transmission and the only basis for production and manufacturing,and its quality is increasingly important. According to the engine design,technology,manufacturing specifications and the standards of CAD / CAM data quality inspection,the quality inspection system of 3D model are studied and developed in this paper to solve the problem existing in manual quality inspection of the 3D model. It was used in the process of developing the liquid propellant rocket engine. The efficient and rapid quality inspection of the three-dimensional model was achieved to reduce the repeated design caused by the quality problem of three-dimensional model,which has promoted the quality improvement of three-dimensional model of the model to ensure that the three-dimensional model meets the requirements of follow-up intelligent manufacturing and shorten the development cycle of the products.

参考文献/References:

[1] 范玉青. 现代飞机制造技术[M]. 北京:北京航空航天大学出版社,2001.
[2] 休泽尔D K.液体火箭发动机现代工程设计[M]. 朱宁昌,等译.北京:中国宇航出版社.2004.
[3] 谭永华. 大推力液体火箭发动机研究[J].宇航学报,2013(10):1303-1308.
[4] 郑大勇,陶瑞峰,张玺,等.大推力氢氧发动机关键技术及解决途径.火箭推进,2014,40(2):22-27.
ZHENG Dayong,TAO Ruifeng,ZHANG Xi,et al. Study on key technology for large thrust LOX/LH2 rocket engine [J]. Journal of rocket propulsion,2014,40(02): 22-27.
[5] RADHAKRISHNA M,RAO C K. Vibration of double bellows type expansion joint in lateral and rocking modes [J]. International journal of structural stability and dynamics,2006,06(04): 575-588.
[6] 罗宏瀚. 借助有限元分析对输流波纹管元件的减振研究[J]. 矿山机械,2008,36(13):52-56.
[7] 刘永刚,司东宏,马伟等. 流固耦合下含夹层阻尼的多层金属波纹管刚度和阻尼研究[J]. 机械工程学报,2014,50(5):74-81.
[8] 罗宏瀚. 输流波纹管流固耦合振动的初步研究[J]. 振动与冲击,2008,27(11):149-153.
[9] 梁建术,苏强,李欣业. 基于ANSYS/Workbench流固耦合输液波纹管的模态分析[J]. 机械设计与制造,2013(2):91-93.

相似文献/References:

[1]郑 伟,李护林,陈新红.激光快速成形技术在液体动力领域的应用前景[J].火箭推进,2015,41(06):1.
　ZHENG Wei,LI Hulin,CHEN Xinhong.Application prospect of laser rapid prototyping technology in the field of liquid power[J].Journal of Rocket Propulsion,2015,41(02):1.
[2]郭 敬,宋晶晶,孔凡超.发动机推进剂增压输送系统建模仿真技术综述[J].火箭推进,2015,41(05):1.
　GUO Jing,SONG Jingjing,KONG Fanchao.Overview of modeling and simulation technology for propellant pressurization feed system of liquid rocket engine[J].Journal of Rocket Propulsion,2015,41(02):1.
[3]于 康,谢荣华,陈晓江.表面张力贮箱电子束焊接工艺研究[J].火箭推进,2015,41(05):89.
　YU Kang,XIE Ronghua,CHEN Xiaojiang.Study on electron beam welding process for surface tension tank[J].Journal of Rocket Propulsion,2015,41(02):89.
[4]刘中华,苏 晨,汪军安,等.气路膜片设计研究[J].火箭推进,2015,41(05):95.
　LIU Zhonghua,SU Chen,WANG Junan,et al.Design and study of pneumatic diaphragm in gas circuit[J].Journal of Rocket Propulsion,2015,41(02):95.
[5]薛 薇,蔡震宇,曹红娟,等.基于可视化平台的液氢/液氧火箭发动机核心部件质量计算[J].火箭推进,2015,41(04):61.
　XUE wei,CAI Zhenyu,CAO Hongjuan,et al.Mass calculation of key assembly units in LH2/ LOX rocket engine based on visual interface[J].Journal of Rocket Propulsion,2015,41(02):61.
[6]穆朋刚,童 飞,蒲光荣,等.温度对贮箱增压系统的影响分析[J].火箭推进,2015,41(04):74.
　MU Penggang,TONG Fei,PU Guangrong,et al.Influence of temperature on tank pressurization system[J].Journal of Rocket Propulsion,2015,41(02):74.
[7]高朝辉,刘 宇,肖 肖,等.垂直着陆重复使用运载火箭对动力技术的挑战[J].火箭推进,2015,41(03):1.
　GAO Zhao-hui,LIU Yu,et al.Challenge to propulsion technology for vertical landing reusable launch vehicle[J].Journal of Rocket Propulsion,2015,41(02):1.
[8]申智帅,等.气动增压器技术及其在空间推进系统的应用[J].火箭推进,2015,41(03):15.
　SHEN Zhi-shuai,RUAN Hai-jun,et al.Pneumopump technology and its application in space propulsion system[J].Journal of Rocket Propulsion,2015,41(02):15.
[9]张 翔,徐洪平,安雪岩,等.液体火箭发动机稳态运行故障 数据聚类分析研究0[J].火箭推进,2015,41(02):118.
　ZHANG Xiang,XU Hong-ping,AN Xue-yan,et al.Clustering analysis for fault data in steady process of liquid propellant rocket engine[J].Journal of Rocket Propulsion,2015,41(02):118.
[10]窦 唯,闫宇龙,金志磊,等.某发动机涡轮泵转子高温超速/疲劳试验研究[J].火箭推进,2015,41(01):15.
　DOU Wei,YAN Yu-long,JIN Zhi-lei,et al.Fatigue experiment of turbo-pump rotor at over-speed and high temperature condition[J].Journal of Rocket Propulsion,2015,41(02):15.

备注/Memo

收稿日期:2017-03-21
作者简介: 陈彦林(1971—),男,高级工程师,研究领域为发动机数字化设计

更新日期/Last Update: 1900-01-01