航天推进技术研究院主办
[1]杨立博,石波,鲁海峰,等.射频离子推力器壳体结构点阵材料拓扑优化[J].火箭推进,2023,49(04):51-59.
YANG Libo,SHI Bo,LU Haifeng,et al.Topological optimization of lattice material for shell structure of RF ion thruster[J].Journal of Rocket Propulsion,2023,49(04):51-59.
点击复制
YANG Libo,SHI Bo,LU Haifeng,et al.Topological optimization of lattice material for shell structure of RF ion thruster[J].Journal of Rocket Propulsion,2023,49(04):51-59.
射频离子推力器壳体结构点阵材料拓扑优化
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
49
期数:
2023年04期
页码:
51-59
栏目:
目次
出版日期:
2023-08-25
- Title:
- Topological optimization of lattice material for shell structure of RF ion thruster
- 文章编号:
- 1672-9374(2023)04-0051-09
- 分类号:
- V439+.4
- 文献标志码:
- A
- 摘要:
- 针对射频离子推力器的壳体结构轻量化要求,研究了点阵材料拓扑优化设计思路和方法。首先,通过静力学仿真和动力学仿真对原结构进行了分析,获得了结构改进基础; 其次,应用结构拓扑优化方法获得了结构的传力路径; 再次,结合传力路径和壳体结构的安装使用要求,获得了最佳的点阵材料优化设计域; 最后,通过点阵材料优化设计,获得了最佳的点阵拓扑优化结构方案。与原结构进行对比,优化方案质量减小31.5%; 动力学方面,结构模态整体提升,较好避开了推力器工作时的振动频率范围; 受载条件下结构最大应力降低达59%～67%,应力分布更加均匀,结构变形也相应减小,结构刚度有所提升。优化后结构的轻量化和性能改善验证了设计方法的有效性。
- Abstract:
- Aiming at the light weight requirement of the shell structure of RF ion thruster, the idea and method of topology optimization design of lattice material were studied. Firstly, the original structure was analyzed by statics simulation and dynamics simulation to obtain the improved foundation of the structure. Secondly, the force transfer path of the structure was obtained by using the topology optimization method of the structure. Thirdly, the optimum design domain of lattice material was obtained by combining the load transfer path and the installation and use requirements of shell structure. Finally, the optimal scheme of lattice topology optimization was obtained through the optimal design of lattice materials. Compared with the original structure, the mass of the optimized scheme was reduced by 31.5%. In terms of dynamics, the modals of the structure was improved, which is better to avoid the vibration frequency range of the thruster when working. Under load, the maximum stress of the structure was reduced by 59%-67%. The stress distribution of the structure is more uniform, the deformation of the structure is reduced correspondingly, and the stiffness of the structure is improved. The light weight and performance improvement of the optimized structure verify the effectiveness of the design method.
参考文献/References:
[1] 赵杨,邓永锋,魏建国,等.真空微弧推进系统试验及在轨测试[J].火箭推进,2022,48(4):88-96.
ZHAO Y,DENG Y F,WEI J G,et al.Experimental study on vacuum micro-arc thruster and on-orbit test[J].Journal of Rocket Propulsion,2022,48(4):88-96.
[2] 杨振宇,赵杨,李光熙,等.1 mN射频离子推力器参数与性能分析[J].火箭推进,2020,46(3):75-82.
YANG Z Y,ZHAO Y,LI G X,et al.Parameters and performance analysis of 1 mN RF ion thruster[J].Journal of Rocket Propulsion,2020,46(3):75-82.
[3] 袁家军,于登云,陈烈民,等.卫星结构设计与分析[M].北京:中国宇航出版社,2004.
[4] 周克民,李俊峰,李霞.结构拓扑优化研究方法综述[J].力学进展,2005,35(1):69-76.
[5] 卢天健,何德坪,陈常青,等.超轻多孔金属材料的多功能特性及应用[J].力学进展,2006,36(4):517-535.
[6] LIU T,DENG Z C,LU T J.Bi-functional optimization of actively cooled,pressurized hollow sandwich cylinders with prismatic cores[J].Journal of the Mechanics and Physics of Solids,2007,55(12):2565-2602.
[7] WANG J,LU T J,WOODHOUSE J,et al.Sound transmission through lightweight double-leaf partitions:Theoretical modelling[J].Journal of Sound and Vibration,2005,286(4/5):817-847.
[8] 杜义贤,李涵钊,田启华,等.基于能量均匀化的高剪切强度周期性点阵结构拓扑优化[J].机械工程学报,2017,53(18):152-160.
[9] ZHOU Q,MAYER R R.Characterization of aluminum honeycomb material failure in large deformation compression,shear,and tearing[J].Journal of Engineering Materials and Technology,2002,124(4):412-420.
[10] AL-HOMOUD D M S.Performance characteristics and practical applications of common building thermal insulation materials[J].Building and Environment,2005,40(3):353-366.
[11] 杜善义.先进复合材料与航空航天[J].复合材料学报,2007,24(1):1-12.
[12] 左蔚,赵剑,白静,等.激光选区熔化菱形正十二面体点阵材料的承载与失效特性[J].火箭推进,2020,46(5):87-93.
ZUO W,ZHAO J,BAI J,et al.Research on bearing and disable properties of laser selective melting rhombohedral dodecahedral lattice materials[J].Journal of Rocket Propulsion,2020,46(5):87-93.
[13] ARABNEJAD KHANOKI S,PASINI D.Fatigue design of a mechanically biocompatible lattice for a proof-of-concept femoral stem[J].Journal of the Mechanical Behavior of Biomedical Materials,2013,22:65-83.
[14] COELHO P G,FERNANDES P R,GUEDES J M,et al.A hierarchical model for concurrent material and topology optimisation of three-dimensional structures[J].Structural and Multidisciplinary Optimization,2008,35(2):107-115.
[15] 廖中源,王英俊,王书亭.基于拓扑优化的变密度点阵结构体优化设计方法[J].机械工程学报,2019,55(8):65-72.
[16] WANG Y J,XU H,PASINI D.Multiscale isogeometric topology optimization for lattice materials[J].Computer Methods in Applied Mechanics and Engineering,2017,316:568-585.
[17] 冯佳宾.变密度法在连续体与点阵材料拓扑优化中的应用研究[D].武汉:华中科技大学,2019.
[18] SIGMUND O.A 99 line topology optimization code written in Matlab[J].Structural and Multidisciplinary Optimization,2001,21(2):120-127.
[19] OGUMA M,JINGUJI K,KITOH T,et al.Flat-passband interleave filter with 200 GHz channel spacing based on planar lightwave circuit-type lattice structure[J].Electronics Letters,2000,36(15):1299.
[20] ARABNEJAD S,PASINI D.Mechanical properties of lattice materials via asymptotic homogenization and comparison with alternative homogenization methods[J].International Journal of Mechanical Sciences,2013,77:249-262.
[21] HYUN S,KARLSSON A M,TORQUATO S,et al.Simulated properties of Kagomé and tetragonal truss core panels[J].International Journal of Solids and Structures,2003,40(25):6989-6998.
[22] 朱健峰,戴宁,刘乐乐.功能性点阵结构设计优化技术研究[J].机械设计与制造工程,2020,49(7):1-6.
[23] 梁雄,杜平,朱丽君,等.面向增材制造的镂空点阵结构设计模块分析[J].制造技术与机床,2021(3):44-48.
[24] 洪清泉.OptiStruct & HyperStudy理论基础与工程应用[M].北京:机械工业出版社,2013.
相似文献/References:
[1]杨振宇,赵 杨,李光熙,等.1 mN射频离子推力器参数与性能分析[J].火箭推进,2020,46(03):75.
YANG Zhenyu,ZHAO Yang,LI Guangxi,et al.Parameters and performance analysis of 1 mN RF ion thruster[J].Journal of Rocket Propulsion,2020,46(04):75.
备注/Memo
收稿日期:2022-10-12; 修回日期:2022-10-31
基金项目:国家重点研发计划(2019YFC1907000)
作者简介:杨立博(1989—),男,硕士,高级工程师,研究领域为等离子体应用总体设计。
更新日期/Last Update:
1900-01-01