航天推进技术研究院主办
[1]王芙愿,王毅,杨晓辉,等.改性先驱体制备C/SiC复合材料性能研究[J].火箭推进,2017,43(03):67-73.
WANG Fuyuan,WANG Yi,YANG Xiaohui,et al.Properties of C/SiC composites prepared by modified precursor[J].Journal of Rocket Propulsion,2017,43(03):67-73.
点击复制
WANG Fuyuan,WANG Yi,YANG Xiaohui,et al.Properties of C/SiC composites prepared by modified precursor[J].Journal of Rocket Propulsion,2017,43(03):67-73.
改性先驱体制备C/SiC复合材料性能研究
《火箭推进》[ISSN:1672-9374/CN:CN 61-1436/V]
卷:
43
期数:
2017年03期
页码:
67-73
栏目:
工艺与材料
出版日期:
2017-08-01
- Title:
- Properties of C/SiC composites prepared by modified precursor
- 分类号:
- V425-34
- 文献标志码:
- A
- 摘要:
- 采用交联剂对聚碳硅烷（PCS）先驱体进行改性，以改性先驱体配置溶液制备了C/SiC复合材料。在制备过程中，由于改性先驱体较高的陶瓷产率，缩短了复合材料基体致密化周期，气孔率降低到7.2%，密度提升到2.01 g/m3。在改善试样显微结构的同时，改性先驱体能够明显提升C/SiC复合材料力学性能，弯曲强度提高到459.4 MPa，断裂韧性提升到13.6 MPa·m1/2，相比单组分PCS先驱体分别提高了51.9%和32.0%。烧蚀性能考核表明，试样的线烧蚀率和质量烧蚀率分别为8.3×10-3 mm/s和4.3×10-3 g/s，相比单组分PCS制备的试样分别降低了85.7%和73.1%。通过对试样内部显微结构和考核后形貌进行分析，结果表明试样力学和烧蚀性能的提升主要得益于致密化的基体以及基体对纤维很好的保护作用。
- Abstract:
- A crosslinking agent is used to modify the polycarbosilane (PCS) precursor. The modified precursor is used to fabricate C/SiC composites. Because of the relative high ceramic yield of the modified precursor, the densification time of C/SiC composite was reduced, while the porosity of samples was decreased by 7.2% and the density was increased by 2.01g/m3. With the improvement of the inner microstructure of C/SiC, the modified precursor can also improve the mechanical properties of C/SiC. The bending strength was increased by 459.4MPa and the fracture toughness was increased by 13.6 MPa·m1/2, which were increased by 51.9% and 32.0% respectively in comparison with samples fabricated by the single component PCS precursor. The performance test results of ablation show that the mass ablative rate and the linear ablative rate are 8.3×10-3mm/s and 4.3×10-3g/s respectively, which have been reduced 85.7% and 73.1% respectively in comparison with samples fabricated by the single component PCS precursor. The analysis results of the surface morphology and the inner microstructure of C/SiC indicate that the improvement of mechanical and ablation properties benefit by the dense matrix and the matrix protection for the fiber.
参考文献/References:
[1]NASLAIN R. Processing of ceramic matrix composites[J]. Key Eng Mater, 1998 (164/165): 3-8.
[2]邹武, 张康助, 张立同. 陶瓷基复合材料在火箭发动机上的应用[J]. 固体火箭技术, 2000, 23(2): 60-65.
[3]徐永东, 张立同, 成来飞, 等. 三维针刺碳/碳化硅陶瓷基复合材料及其摩擦磨损性能[J]. 航空材料学报, 2007, 27(1): 28-32.
[4]葛明和, 姚世强, 安鹏. 200 N Cf/SiC复合材料推力器研制[J]. 火箭推进, 2016, 42(3): 15-20.
GE Minghe, YAO Shiqiang, AN Peng. Development of 200N thruster made from Cf/SiC composite[J]. Journal of rocket propulsion, 2016, 42(3): 15-20.
[5]NASLAIN R. CVI-Composites. Ceramic Matrix Composites[M]. New York: Hall, 1992.
[6]徐永东, 张立同, 成来飞, 等. CVI法制备三维碳纤维增韧碳化硅复合材料[J]. 硅酸盐学报, 1996, 24(5): 485.
[7]ZHOU C, ZHANG C, HU H, et al. Preparation of 3D- Cf/SiC composites at low temperatures[J]. Mater sci Eng A, 2008, 488(1): 569-574.
[8]BAE J, CHO K, YOON D, et al. Highly efficient densification of carbon fiber reinforced SiC matrix composites by melting infiltration and pyrolysis using polycarbosane [J]. Ceram int, 2013, 39(5): 5623-5630.
[9]FITZER E, GADOW R. Fiber reinforced silicon carbide [J]. Am ceram soc bull, 1986, 65(2): 326-332．
[10]周海军, 董绍明, 丁玉生, 等. 碳化硅粉体对熔融渗硅法制备Cf/SiC复合材料结构的影响[J]. 人工晶体学报, 2009, 38(s1): 119.
[11]白龙腾, 杨晓辉, 王毅, 等. 低成本制造C/SiC复合材料的热物理性能研究[J]. 火箭推进, 2016, 42(1): 58-65.
BAI Longteng, YANG Xiaohui, WANG Yi, et al. Research on thermal physical properties of C/SiC composite manufactured with low-cost process[J]. Journal of rocket propulsion. 2016, 42(1): 58-65.
[12]YANG Bei, ZHOU Xinggui, YU Jinshan, et al. The properties of Cf/SiC composites prepared from different precursors[J]. Ceram int, 2015 (41): 4207-4213.
相似文献/References:
[1]杨晓辉,王 毅,白龙腾.CVD-PyC界面层和SiC涂层厚度数学计算模型的建立与验证[J].火箭推进,2014,40(05):69.
YANG Xiao-hui,WANG Yi,BAI Long-teng.Establishment and confirmation of mathematical
computational model of thickness of CVD-PyC
interface and SiC coatings[J].Journal of Rocket Propulsion,2014,40(03):69.
[2]白龙腾,杨晓辉,王毅,等.低成本制造C/SiC复合材料的热物理性能研究[J].火箭推进,2016,42(01):58.
BAI Longteng,YANG Xiaohui,WANG Yi,et al.Research on thermal physical properties of C/SiC composite manufactured with low-cost process[J].Journal of Rocket Propulsion,2016,42(03):58.
[3]王芙愿,王毅,杨晓辉,等.C/SiC复合材料在1 700 ℃下氧化机制研究[J].火箭推进,2017,43(06):82.
WANG Fuyuan,WANG Yi,YANG Xiaohui,et al.High-temperature oxidation of C/SiC composites at 1 700 ℃[J].Journal of Rocket Propulsion,2017,43(03):82.
[4]杨晓辉,曹 佩,王 毅,等.C/SiC复合材料喷嘴冲蚀磨损性能及其机理研究[J].火箭推进,2019,45(01):53.
YANG Xiaohui,CAO Pei,WANG Yi,et al.Study on erosion wear properties and its mechanism of C/SiC composite nozzle[J].Journal of Rocket Propulsion,2019,45(03):53.
备注/Memo
收稿日期：2016-10-06；修回日期：2016-10-26 作者简介：王芙愿（1986—），博士，工程师，研究领域为陶瓷基复合材料及高温结构材料
更新日期/Last Update:
1900-01-01