航天推进技术研究院主办
WANG Fuyuan,WANG Yi,YANG Xiaohui,et al.High-temperature oxidation of C/SiC composites at 1 700 ℃[J].Journal of Rocket Propulsion,2017,43(06):82-87.
C/SiC复合材料在1 700 ℃下氧化机制研究
- Title:
- High-temperature oxidation of C/SiC composites at 1 700 ℃
- 文章编号:
- 1672-9374(2017)06-0082-06
- 分类号:
- V250-34
- 文献标志码:
- A
- 摘要:
- 以沉积SiC涂层的C/SiC复合材料为研究对象,利用扫描电镜对复合材料表面进行观察分析,研究了复合材料在1 700 ℃下空氧环境中显微结构和成分演变。结果表明在1 700 ℃下,复合材料的氧化过程主要受到氧气在氧化膜中的扩散控制。C相在氧化过程中以气体的形式消耗殆尽,SiC相氧化形成氧化膜,覆盖在试样表面。由于SiC相氧化过程中伴随气体副产物的释放,在氧化膜中形成大量裂纹。这些裂纹的存在进一步加剧了复合材料的氧化损伤。
- Abstract:
- The C/SiC composite with SiC coating is taken as the research object. The surface change of the composite before and after oxidation is observed and analyzed with an scanning electron microscope to study the microstructure and composition evolution of the composite at 1 700 ℃ in air and oxygen environment. oxidation mechanism. in The results indicate that the oxidation process of C/SiC composite at 1 700 ℃ is mainly controlled by the oxygen diffusion in the oxide film. In the oxidation process, C phase is oxidized and consumed in gas phase, SiC was oxidized and converted into oxide film covering on the sample surface. Because of the volatilization of gas byproduct during SiC oxidation, many cracks appear in oxide film. At high temperature, these cracks become the channel of oxidizing mediums coming into the internal of C/SiC composite, which would accelerate oxidation of C/SiC.
参考文献/References:
[1] PAPAKONSTANTINOU C G, BALAGURU P, LYON R E. Comparative study of high temperature composites [J]. Composites part B:engineering, 2001, 32(8):637-649.
[2] 张鹏, 朱强, 秦鹤勇, 等. 航空发动机用耐高温材料的研究进展[J]. 材料导报, 2014, 28(6): 27-37.
[3] NASLAIN R. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors:an overview [J]. Composites science and technology, 2004, 64(2): 155-170.
[4] NASLAIN R. Materials design and processing of high temperature ceramic matrix composites:state of the art and future trends [J]. Advanced composite materials, 1999, 8(1): 3-16.
[5] 张立同, 成来飞. 连续纤维增韧陶瓷基复合材料可持续发展战略探讨[J]. 复合材料学报, 2007, 24(2): 1-6.
[6] 王芙愿,王毅,杨晓辉,等.改性先驱体制备C/SiC复合材料研究[J].火箭推进,2017, 43(3): 67-73.
WANG Fuyuan, WANG Yi, YANG Xiaohui, et al. The properties of C/SiC composites prepared by the medified precursor[J]. Journal of rocket propulsion, 2017, 43(3): 67-73.
[7] 张立同. 纤维增韧碳化硅陶瓷复合材料—模拟、表征与设计[M]. 北京:化学工业出版社, 2009.
[8] 殷小玮. 3D C/SiC复合材料的环境氧化行为[D]. 西安: 西北工业大学博士学位论文, 2001.
[9] 魏玺. 3D C/SiC复合材料氧化机理分析及氧化动力学模型 [D]. 西安:西北工业大学硕士学位论文, 2004.
[10] 潘牧, 南策文. 碳化硅(SiC)基材料的高温氧化和腐蚀[J]. 腐蚀科学与防护技术, 2000,12(2): 26-30.
[11] PAREEK V, SHORES A. Oxidation of silicon carbide in environments containing potassium salt vapor [J]. Journal of the American ceramic society, 1991, 77(4): 556-63.
[12] FILIPUZZI L, NASLAIN R, JAUSSAUD C. Oxidation kinetics of SiC deposited from CH3SiCl3/H2 under CVI-conditions [J]. Journal of material science, 1992, 27: 3330-3334.
相似文献/References:
[1]杨晓辉,王 毅,白龙腾.CVD-PyC界面层和SiC涂层厚度数学计算模型的建立与验证[J].火箭推进,2014,40(05):69.
YANG Xiao-hui,WANG Yi,BAI Long-teng.Establishment and confirmation of mathematical
computational model of thickness of CVD-PyC
interface and SiC coatings[J].Journal of Rocket Propulsion,2014,40(06):69.
[2]白龙腾,杨晓辉,王毅,等.低成本制造C/SiC复合材料的热物理性能研究[J].火箭推进,2016,42(01):58.
BAI Longteng,YANG Xiaohui,WANG Yi,et al.Research on thermal physical properties of C/SiC composite manufactured with low-cost process[J].Journal of Rocket Propulsion,2016,42(06):58.
[3]王芙愿,王毅,杨晓辉,等.改性先驱体制备C/SiC复合材料性能研究[J].火箭推进,2017,43(03):67.
WANG Fuyuan,WANG Yi,YANG Xiaohui,et al.Properties of C/SiC composites prepared
by modified precursor[J].Journal of Rocket Propulsion,2017,43(06):67.
[4]杨晓辉,曹 佩,王 毅,等.C/SiC复合材料喷嘴冲蚀磨损性能及其机理研究[J].火箭推进,2019,45(01):53.
YANG Xiaohui,CAO Pei,WANG Yi,et al.Study on erosion wear properties and its mechanism of C/SiC composite nozzle[J].Journal of Rocket Propulsion,2019,45(06):53.
备注/Memo
收稿日期:2017-01-07
作者简介: 王芙愿(1986—),男,博士,研究领域为陶瓷基复合材料及高温结构材料